Brush Cleaner

Promac Brush Cleaner is a heavy duty solvent based, multipurpose cleaner and degreaser which is water rinsable.

• Paint and grease remover

• Clean, restore and condition brushes and rollers

• Easily rinsed with water

• Lead content, less than 90 ppm

Do not use on plastics, painted areas and other surfaces that may be attacked by the solvents. Test an area before use.

TO CLEAN BRUSHES OR ROLLERS

Remove excess paint. Pour a small amount of Promac Brush Cleaner into a clean container. Work the cleaner thoroughly into the paint brush bristles or roller while the paint dissolves. Squeeze out and rinse well with water. Repeat if necessary.

TO REMOVE POLISH, OILS, GREASE AND TAR

Dab onto a clean cloth and wipe off. Heavy duty degreasing: Swab Promac Brush Cleaner onto the surface using a bristle brush or broom. Leave for approximately 15 minutes, then flush off thoroughly with water while scrubbing with a brush or broom. Repeat if necessary. In such cases, allow the surface to dry before reapplying.

TO CLEAN DRIED PAINT BRUSHES, ROLLERS AND PAINTING TOOLS

If enamel paint has dried on the brush or roller, soak it in Promac Paint Stripper first, allowing the paint to soften and blister, then clean with Promac Brush Cleaner. Squeeze out and rinse well with water. Repeat if necessary.

1L

Download Technical Data Sheet here
Download Safety Data Sheet here

Recommended Top Coat Products